Recording And Replaying Data; Formatting Memory (Ram) Cards - Furuno RP-340 Operator's Manual

3.8

Recording and Replaying Data

3.8.1

Formatting memory (RAM) cards

Before you can use a memory (RAM) card with the RP-340, the card must be
formatted. Formatting prepares the recording surface of the card for use with the
system, and deletes all data recorded in the memory card.
Note: You can format cards you've used before, however, in which case all prior
information on them is erased.
1. Insert the memory card in the right side card slot.
2. Press the [NAV MENU] and [6] keys to choose CARD.
3. Press the [6] key to choose RECORD.
4. Press the [ENTER] key to show the RECORD CARD menu.
5. Press the [0] key twice to choose YES from FORMAT.
6. Press the [ENTER] key. When formatting is completed the message
"COMPLETED" appears.
7. Press the [NAV MENU] key to close the menu.
Eject button
for left card drive
Card Drive
Right: RAM card
Left: Chart card
Eject button
for right card
drive
Card slot
[RECORD CARD]
1 [VIDEO PLOTTER 1]
2 OWN SHIP PLOT
FILE T
3 TARGET PLOT
FILE A
4 MARK
FILE M
0 FORMAT
NO/YES
Record card menu
3 VIDEO PLOTTER
Display unit
39