Troubleshooting
The indicator light is blinking
The indicator light blinks red until you set up fax and e-mail. To disable the blinking light, follow these steps:
Note: Before completing these instructions for a printer on a network, make sure the fax cables are connected.
1
From the home screen, navigate to:
Menus > Settings > General Settings
2
Touch the left or right arrow next to Run initial setup, and then touch Yes > Submit.
3
Turn the printer off, and then turn the printer back on.
4
From the printer control panel, touch your language.
5
Touch your country or region, and then touch Continue.
6
Select your time zone, and then touch Continue.
7
Touch Fax and E-mail to clear the icons, and then touch Continue.
Note: You can use these same steps to enable fax and e-mail.
Understanding printer messages
Adjusting color
Wait for the process to complete.
An error has occured with the Flash Drive. Please remove and re-
insert the drive.
Try one or more of the following:
•
Remove and reinsert the flash drive.
•
If the error message remains, the flash memory may be defective and require replacing.
An error has occurred with the USB drive. Please remove and
reinsert drive.
Try one or more of the following:
•
Remove and reinsert the flash drive.
•
If the error message remains, the flash memory may be defective and require replacement.
Troubleshooting
252