Menu item
Automatic Method
Single pass
Multiple pass
Manual Method
Single pass
Multiple pass
Scheduled Method
Single pass
Multiple pass
Security Audit Log menu
Menu item
Export Log
Delete Log
Yes
No
Description
Automatic wiping marks all disk space used by a previous print job and does not
permit the file system to reuse this space until it has been cleared.
Only Automatic wiping enables users to activate disk wiping without having to turn
the printer off for an extended amount of time.
Notes:
•
"Single pass" is the factory default setting.
•
Highly confidential information should be wiped using only the Multiple pass
method.
Both manual and scheduled wiping allow the file system to reuse marked disk space
without having to wipe it first.
Notes:
•
"Single pass" is the factory default setting.
•
This menu item will not appear if Wiping Mode is set to "Off" or "Auto".
•
Highly confidential information should be wiped using only the Multiple pass
method.
Both manual and scheduled wiping allow the file system to reuse marked disk space
without having to wipe it first.
Notes:
•
"Single pass" is the factory default setting.
•
This menu item will not appear if Wiping Mode is set to "Off" or "Auto".
•
Highly confidential information should be wiped using only the Multiple pass
method .
•
Scheduled wipes are initiated without displaying a user warning or
confirmation message.
Description
Enables an authorized user to export the audit log
Notes:
•
To export the audit log from the printer control panel, a flash drive must be
attached to the printer.
•
From the Embedded Web Server, the audit log can be downloaded to a
computer.
Specifies whether audit logs are deleted
Note: "Yes" is the factory default setting.
Understanding printer menus
163