Scanning To An Ftp Address - Lexmark X790 Series User Manual

Scanning to an FTP address

ADF
Use the ADF for multiple-page documents. Use the scanner glass for single pages, small items (such as postcards or
The scanner lets you scan documents directly to a File Transfer Protocol (FTP) server. Only one FTP address may be
sent to the server at a time.
Once an FTP destination has been configured by your system support person, the name of the destination becomes
available as a shortcut number. An FTP destination could also be another printer; for example, a color document can
be scanned and then sent to a color printer.
Scanning to an FTP address
Scanning to an FTP address using the touch screen
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the paper guides.
3
From the home screen, navigate to:
FTP > FTP > type the FTP address > Send It
Scanning to an FTP address using a shortcut number
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the paper guides.
Scanner glass
photos), transparencies, photo paper, or thin media (such as magazine
clippings).
Scanning to an FTP address
122