Fax Settings Menu - Lexmark X790 Series User Manual

Fax Settings menu

Fax Mode (Analog Fax Setup) menu
Analog Fax Setup mode sends the fax job by way of a telephone line.
General Fax Settings
Menu item
Fax Name or Station Name
Fax Number or Station
Number
Station ID
Fax Name or Station Name
Fax Number or Station Number
Enable Manual Fax
Off
On
Memory Use
Equal
Mostly sent
All send
All receive
Mostly receive
Cancel Faxes
Allow
Don't Allow
Caller ID
On
Off
Alternate
Fax number masking
Off
From left
From right
Digits to mask
0–58
Description
Specifies the name of the fax in the printer
Specifies a number associated with the fax
Specifies how the fax is identified
Sets the printer to fax manually only, which requires a line splitter and a telephone
handset
Notes:
•
Use a regular telephone to answer an incoming fax job and to dial a fax number.
•
Touch # 0 on the numeric keypad to go directly to the Manual Fax function.
Defines the allocation of non-volatile memory between sending and receiving fax
jobs
Notes:
•
Equal is the factory default setting. Equal splits the memory for sending and
receiving fax jobs into equal amounts.
•
Mostly sent specifies that most of the memory is set to send fax jobs.
•
All send specifies that all the memory is set to send fax jobs.
•
All receive specifies that all the memory is set to receive fax jobs.
•
Mostly receive specifies that most of the memory is set to receive fax jobs.
Specifies whether or not the printer cancels fax jobs
Specifies type of caller ID being used
Specifies the direction from where digits are masked in an outgoing fax number
Note: The number of characters masked is determined by the "Digits to mask"
setting.
Specifies the number of digits to mask in an outgoing fax number
Understanding printer menus
179