Print Settings - Lexmark X790 Series User Manual

Menu item
Color Dropout
Color Dropout
None
Red
Green
Blue
Default Red Threshold
0–255
Default Green Threshold
0–255
Default Blue Threshold
0–255
Contrast
Best for content
0–5
Mirror Image
Off
On
Negative Image
Off
On
Shadow Detail
-4 to 4
ADF Skew Fix
Off
On
Scan edge to edge
Off
On
Sharpness
1–5
Temperature
-4 to 4

Print Settings

Copies
1–999
Description
Specifies which color to drop during scanning, and how much to increase or
decrease the dropout
Notes:
•
None is the factory default setting for Color Dropout.
•
128 is the factory default setting for each color threshold.
Specifies the contrast of the scanned image
Note: "Best for content" is the factory default setting.
Creates a mirror image of the original document
Note: Off is the factory default setting.
Creates a negative image of the original document
Note: Off is the factory default setting.
Adjusts the amount of shadow detail visible on a scanned image
Note: 0 is the factory default setting.
Specifies whether or not to fix slight skew on the scanned image
Note: Off is the factory default setting
Specifies whether the original document is scanned edge-to-edge
Note: Off is the factory default setting.
Adjusts the amount of sharpness on a scanned image
Note: 3 is the factory default setting.
Enables the user to specify "warm" or "cool" outputs. "Cool" values generate a bluer
output than the default while "warm" values generate a redder output than the
default.
Specifies a default number of copies for each print job
Note: 1 is the factory default setting.
Understanding printer menus
202