Lexmark X790 Series User Manual page 195

Menu item
Content Source
Color Laser
Inkjet
Magazine
Press
Black/White Laser
Photo/Film
Newspaper
Other
Color
Color
Gray
Resolution
150
200
300
400
600
75
Darkness
1–9
Orientation
Portrait
Landscape
Description
Specifies how content will be produced
Notes:
•
Color Laser is the factory default setting. Color Laser is used when the original
document was printed using a color laser printer.
•
Black/White is used when the original document was printed using a
black/white laser printer.
•
Inkjet is used when the original document was printed using a inkjet printer.
•
Photo/Film is used when the original document is a photo from film
•
Magazine is used when the original document is from a magazine.
•
Newspaper is used when the original document is from a newspaper.
•
Press is used when the original document was printed using a printing press.
•
Other is used when the original document was printed using an alternate or
unknown printer.
Specifies whether a job prints in grayscale or color
Note: Color is the factory default setting.
Specifies how many dots per inch are scanned
Note: 150 dpi is the factory default setting.
Lightens or darkens the output
Note: 5 is the factory default setting.
Specifies the orientation of the scanned image
Note: Portrait is the factory default setting.
Understanding printer menus
195