5.8.8. Setting the deep stops
In the AIR mode in the Deep Stops setting mode, the Deep stops can be set "ON" or
"OFF" depending on whether the Deep stops are used or not. In the MIXED mode the
Deep stops are always set ON.
5.8.9. Setting the units
In the Unit settings you are able to choose between metric (meters/Celsius/bar) and
imperial (feet/Fahrenheit/psi) units.
5.9. Activation and pre-checks
This section describes how to activate the DIVE mode and explains the pre-checks
that it is highly recommended you perform before you get into the water.
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
55