5.8.4. Setting the tank pressure alarm
The tank pressure alarm can be set "ON" or "OFF" and in the range of 10–200 bar.
The alarm is the secondary cylinder pressure alarm point. The alarm is activated when
the tank pressure drops below the set limit. You can acknowledge this alarm.
The 50 bar/700 psi alarm, however, is fixed and cannot be changed. You cannot ac-
knowledge this alarm.
TANK PRESSURE HAS DROPPED BELOW 50 BAR
AND THE REMAINING AIR TIME IS 4 MINUTES. THE
DISPLAY BLINKS AND THERE IS AN AUDIBLE ALARM.
5.8.5. Setting the depth alarm
The Depth Alarm setting is factory-set to 30 m/100 ft, but you can adjust it according
to your personal preference, or switch it off altogether. The depth range can be set
from 3 m to 120 m/10 ft to 394 ft.
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
53