C H A P T E R 2
F
EATURES
This section covers:
S Using the USB or DB-9 communication port
S Starting the UPS on battery
Communication Options
The UPS is equipped with a USB and a DB-9 communication port. Either
the USB port or the DB-9 communication port may be used to monitor
the UPS; however, they cannot operate simultaneously.
USB Port
The UPS can communicate with a USB-compliant computer using
LanSafe Power Management Software (v4.15 or higher).
To establish communication between the UPS and a computer:
1. Connect the USB cable to the USB port on the UPS rear panel.
2. Install the LanSafe software and USB drivers according to the
S
Powerware
3110 User's Guide
Rev B www.powerware.com
®
Connect the other end of the USB cable to the USB port on your
computer.
instructions provided with the Powerware Software Suite CD.
5