3
3.3
Fax Function
3.3.1
Required settings and basic operations
This section describes the settings required to send and receive a fax via a telephone line as well as the basic
operations.
Preparation flow
The following describes a preparation flow to send a fax. For details, refer to the relevant page.
This preparation is not required the second time or subsequent times.
1
Checking the cable connection (Administrator)
% Check that this machine is correctly connected to the telephone line. For details, refer to page 3-47.
2
Registering transmission information (Administrator)
% Specify the name and fax number to be displayed as a sender when sending a fax from this ma-
chine. For details, refer to page 3-48.
3
Selecting the dialing method (Administrator)
% Select the dialing method to suit your environment. For details, refer to page 3-49.
Operation flow
The following describes a flow to send a fax. For details, refer to page 3-50.
1
Loading the original
2
Entering a destination
% Enter the destination fax number, and check the settings such as the image quality.
3
Press the Start key.
% Press the Start key to send the original.
3-46
Fax Function
bizhub C554/C454/C364/C284/C224
3.3