Konica Minolta bizhub C364e Using

Making Copies

1
Place the original face
down on the original glass.
Multiple Jobs
From the Job List screens, multiple jobs can be managed.
The Job List screen can be displayed if [Job List] is pressed
while the Basic screen is displayed in the touch panel.
Job List screen
2
1
3
4
5
1 4
Displays a list of the Displays the settings
jobs queued to be for a job that is queued
printed to be printed
2 5
Displays a list of the Displays detailed
jobs that have been information for the
printed selected job
3
Queued jobs can be
prioritized (interrupt
printing) so that they
will be printed before
other jobs.

Using the Machine

Position the original to be copied.
Load the original face up
into the reverse automatic
document feeder.
The finishing method and various
other settings can be specified.
Press [Original Type], and then
2
specify the desired settings.
Print copies at full size
with the same color
and on paper of the
3 Press [Color], and then specify
same size as the the desired settings.
original.
4 Press [Duplex/Combine], and
then specify the desired settings.
5
Specify the number of copies.
To change the setting for the number
of copies, tap [C], and then specify
the desired number of copies.
6
Press the [Start] key.
To stop copying, press
the [Stop] key.
For more detailed operating procedures and instructions, refer to the User's Guide.

Loading Paper

1. Pull out the desired tray. 2. Slide the lateral guides to fit the
size of paper to be loaded.
1. Press the tray release button, and then pull out
the LCT (built-in).
1. Open the upper door of the large-capacity
paper feed unit.
Edit Color Functions
"Mirror Image"
Function
Produces a copy in the
mirror image of the
original
"Background Removal"
Function
Yellow Camel
Brown
Magenta
Cyan Forest Green
Produces a copy using
Red Maroon
one of the 18 colors
Green Plum
Orange Purple available as the color
Pumpkin Pink
of the background
Yellow
Green Aquamarine
Blue
Teal
(blank areas)
(Original)
"Neg-/Pos. Reverse"
Function
Produces a copy with the
light- and dark-colored
areas of the original
image inversed
The images that are provided are print samples.
They may slightly differ in color with actual color copies.
3. Load the paper into the tray.
2. Load the paper into the right and left sides of the LCT
(built-in).
2. Lift up the paper take-up roller, and then load the
paper into the tray.

Adjust Color Parameters

"Brightness" Parameter
(-3) (+3)
"Saturation" Parameter
(-3) (+3)
"Copy Density" Parameter
(-3) (+3)
A5AY-9566PO-00