Assigning Door Use And Unlock Time Zones - Chamberlain Elite EL Series Programming Manual

Assigning Door Use and Unlock Time Zone
Unlock Time Zones allow you to automatically unlock and lock doors/gates at times
you specify.
Assign "Door Use Time Zone":
Door Use Time Zone allows you to set up time periods and days during which access is
restricted for all entry codes, cards and transmitters. For example, to prohibit residents
from entering the building through Door 2 on Sundays, create a time zone that excludes
Sunday and assign it to Door 2.
Press
1
Enter Door Number (1 to 4). Then (#)
2
Enter Time Zone Number (0 to 63). Then (#)
3
0=Full Restrictions 1=Full Access
Example:
Enable or Disable Unlock Schedule:
Enable or disable auto unlock/lock schedule as necessary.
Factory Setting: Enabled
Press
1
Enable (1) or Disable (0). Then (#)
2
Assign Door Auto Lock / Unlock Schedule:
Assign an auto unlock/lock schedule to a door. During the schedule, the door will be
unlocked. For example, if the main door has a schedule from 8AM to 5PM, the door will
unlock at 8AM and lock at 5PM.
Press
1
Enter Door Number (1 to 4). Then (#)
2
Enter Schedule Number (2 to 63; or 99). Then (#)
3
Example:
63
Factory Setting: Enabled
Then
1
Assigns door "2" to use time zone "3".
Then
Example:
1
Auto unlock/lock schedule is disabled.
Factory Setting: Disabled
Then
1
Assigns door "1" to unlock schedule "2".
Page 51
2 3
11
2
31
NOTE: Use a schedule number of "99"
to disable auto/unlock schedule for a
particular door.
2 3