Chamberlain LIFTMASTER MUGAPLM User Manual

®
Overview
The Multi-Unit Gate Access Panel (MUGAPLM) uses
a digitally secure intercom link that allows it to control
up to four gate operators and other accessories. It
can be used with up to 63 homes and program up to
120 remote control transmitters.
The MUGAPLM is compatible with various LiftMaster
Wireless Products.
Carton Inventory
Multi-Unit Gate Access Panel (MUGAPLM)
Key (2)
Accessory Overview
Telephone Interface Unit (OTIU): The
OTIU allows the user to identify which
gate or door a visitor is at with Caller ID
and a distinctive ring tone. To answer a
call press "0". A gate can be opened by
dialing "*9" on the telephone keypad.
Multi-Unit Telephone Interface
(MUOTIU): The MUOTIU acts as a
wireless remote autodialer in a dedicated
line system.
Portable Intercom: The intercom allows
the user to speak with visitors at the
MUGAPLM and open the gate by holding
the Remote button for 10 seconds.
Flush Mount Intercom: The intercom
allows the user to speak with visitors at
the MUGAPLM.
Repeater Set: Repeaters are used to
extend the range between the
MUGAPLM and other devices. They are
recommended for use with buildings with
stucco or cement walls.
Remote Control Transmitter: The
remote control transmitter will open the
gate when the numbered button is held
down for 5 seconds within 75' of the
MUGAPLM.
MUGAPLM Installation &
Assembly
Step 1
Choose mounting location for MUGAPLM. Remove
the back panel and attach it to a solid surface or post.
Step 2
Bolt (4)
Washer (4)
Install 4 C batteries (not provided) in the MUGAPLM
Nut (4)
and it will beep until the Master PIN Number is
entered.
NOTE: To prevent damage to the circuit DO NOT use
C size Lithium batteries or rechargeable batteries. If
Lithium batteries are needed, switch the C battery
pack with the provided AA battery pack.
Step 3
On keypad press:
Step 4
Enter 4 digit Master PIN Number. Example: 1234.
NOTE: " * " is a cancel button that will cancel any call
or key sequence.
Step 5
Mount the MUGAPLM onto the back panel. Lock
MUGAPLM with key.
NOTE: Do not slam the MUGAPLM against the wall
or the temper sensor will activate.
If additional MUGAPLM is being used see Operation
& Features: Multi-GAP Mode.
1
Model MUGAPLM
Multi-Unit Gate Access Panel
# # #
? ?
? ?
"BEEP" "BEEP"