INSTALLATION
WIRING A GATE OPERATOR (NORMALLY OPEN) &
A DOOR STRIKE LOCK (NORMALLY OPEN)
The door strike can be connected to Relay 1 or Relay 2. See the
Programming section for information about configuring Relays 1
and 2.
AC or DC
Power
NOTE: For DC power
install a 1N4001 diode
or equivalent.
WIRING A GATE OPERATOR (NORMALLY OPEN) &
A MAGLOCK (NORMALLY CLOSED)
The maglock can be connected to Relay 1 or Relay 2. See the
Programming section for information about configuring Relays 1
and 2.
NOTE: Install a 1N4001
diode or equivalent.
>> WIRING A GATE OPERATOR (NORMALLY OPEN) A DOOR STRIKE LOCK
(NORMALLY OPEN) AND WIRING A GATE OPERATOR (NORMALLY
OPEN) & A MAGLOCK (NORMALLY CLOSED)
Door Strike
NOTE: Do not use
the unit's power supply
for the door strike.
NOTE: For AC power install a
Siemens S10K30 MOV
(Metal Oxide Varistor) or equivalent.
DC Power
NOTE: Do not use
Maglock
the unit's power
supply for the maglock.
COM (Common)
NC (Normally Closed)
Notes about wire connectors
(terminal blocks):
• Wire connectors can be
removed to simplify wiring.
• DO NOT overload wire
connectors. Use ONLY one
wire per hole.
RELAY 2
RELAY 1
COM
COM (Common)
(Common)
NO (Normally Open)
RELAY 2
RELAY 1
COM
(Common)
8
TEL CO
HOU SE
NO
Primary Gate Operator
(Normally Open)
(Strike Open Input)
NO
Primary Gate Operator
(Normally Open)
(Strike Open Input)