Chamberlain Elite EL Series Programming Manual page 63

Table of all messages (text) shown to visitor on units with a display. Inside the table contains an inner
box to simulate the display, the action to produce the message and any other notes.
# Name Display Message
1. Welcome Aug 20, 2006 12:34PM
2. Instruction
USE (UP) & (DOWN) KEYS TO FIND A
NAME THEN PRESS THE
CALL BUTTON OR # KEY
3. Tenant List RESIDENT
<END OF LIST>
SELECT AND PRESS #
4. Tenant List James Smith
Scroll Bar Jane Jones
John Doe
SELECT AND PRESS #
5. Dialing SYSTEM DIALING:
Last Name, First
dir#
PRESS * TO HANG UP
6. Talk Time TALKTIME:###
Last Name, First
dir#
PRESS * TO HANG UP
7. Line in Use LINE IN USE
TRY AGAIN LATER
LCD Visitor Messages
WELCOME
Pressing Up or
Down keys.
(Not in a call)
Pressing Up or
Down keys.
(Not in a call)
Dialing screen
tenant picks up
DIRECTORY CODE:
After DTMF is dialed
Resident call
is attempted
Page 62
Action
None If PS160 is set to toggle or
Welcome Only, the welcome
screen is shown while unit is
idle.
None If PS160 is set to toggle
or Instruction Only, the
instruction screen is shown
while unit is idle.
If the unit is not in a call
(dialing or talking) then
pressing up or down key
brings up the tenant list. The
tenant list shows all directory
codes in database that are not
hidden (PS141). The <END OF
LIST> message is only printed
if there is 1 tenant or less in
database.
The inverted box to the right
of the list shows where in the
list the cursor is positioned.
Only shown when dialing a
tenant. This screen is changed
to talktime after the dialing
sequence for directory codes.
This screen stays until
Resident picks up their phone
(non-directory code call).
RESIDENT: Shows time remaining (in
seconds) until phone call is
phone terminated.
Resident has call waiting
disabled and they are in a call.
Or resident's physical phone
line is in use by an incoming
ring, line used for real time
monitoring (RTM) or in use by
another unit sharing line
(multi-unit). Or resident is in
Do Not Disturb portion of
schedule.
Notes