Chamberlain Elite EL Series Programming Manual page 69

Direct Commands from Your Phone:
Direct command allows you to control the unit from the residence phone.
Press
1
command.
Enter the Unit ID code (if applicable).
2
Select one of the following options:
3
Speaking Through the Unit (Intercom Mode):
ABC
Press
Press
1
command.
Enter the Unit ID code (if applicable).
2
Select one of the following options:
3
Open & Close Door:
ABC
Press
Select the Door (1-4) that you want to control. Press
4
then Door 1 is used.
Press
1
command.
Enter the Unit ID code (if applicable).
2
Select one of the following options:
3
Toggle Door Open/Close Until:
ABC
Press
Select the Door (1-4) that you want to control. Press
4
then Door 1 is used.
ONLY for step #2 sections Toggle Door Open/Close Until and Get Door Status -
5
Enter the Latch Time (hhmm=Hour and Minute). Then
120
from the residence phone. The unit is now prepared to accept a direct
Used to initiate communications from the resident
phone through the unit at any time.
Then
from the residence phone. The unit is now prepared to accept a direct
Cycles relay. Typically used to momentarily open a
door/gate for a visitor without having the visitor initiate a
Then
call.
from the residence phone. The unit is now prepared to accept a direct
Activate or deactivate the door's relay group until a
specified time of day. If the door is currently latched
open or in the unlock position of an automatic time
ABC
zone then step
Then
versa.
Page 68
121 122
. NOTE: If no door is selected
122 will latch the door closed and vice
. NOTE: If no door is selected
.