Skid Shoe Height Adjustment; Mower Cutting Height Adjustment - Alamo Industrial Traxx RF Operator's Manual

6. Proper belt tension is indicated when 8 to 12
lbs. of force deflects the belt 1/4".
7. Install front belt cover. Ensure that the grease
fitting access hole is aligned with the grease
fitting.

MOWER CUTTING HEIGHT ADJUSTMENT

Loosen the front bolt and remove the rear bolt on
both sides. Lower to raise the height.

SKID SHOE HEIGHT ADJUSTMENT

Adjust the skid shoe so that it is at least 1/2" above
the ground when the mower is supported by the
roller.
TRAXX RF 04/14
© 2014 Alamo Group Inc.
MAINTENANCE
Maintenance Section 5-26