Installing Tracks - Alamo Industrial Traxx RF Operator's Manual

6. Perform the procedure to manually disengage
the brake systems on both wheel motors.
Note: Refer to Operation Section of this manual for
directions for Towing the Tractor & Implement.
7. While pulling the top of the track away from the
mower rotate the track on the sprockets at the
same time to allow the track to "Walk Off" of the
undercarriage.
The track is heavier than it looks. Do Not try to
hold its weight, rather let it fall to the floor.
Note: Beware, there is a "Pinch Risk" when working
on these components.

Installing Tracks

1. Align the track groove with the rear sprocket
ensuring that the sprocket teeth are in the
correct location.
Lay the front of the track over the idler sprocket
and while pushing the top of the track in, rotate
the track assembly to "Walk" the track on.
TRAXX RF 04/14
© 2014 Alamo Group Inc.
MAINTENANCE
Maintenance Section 5-22