Hydraulic Control Valve; Fuel Water Separator Cleaning And Replacement - Alamo Industrial Traxx RF Operator's Manual

HYDRAULIC CONTROL VALVE

The control valve that controls the hydraulic functions of the machine is located under the vehicle and is only
accessible from beneath the machine. When working on this, or any other item located under the machine,
great care must be taken to ensure the machine is securely positioned before attempting to access or work on
the component.
Never attempt to work under any machine that it not safely supported and chocked using
suitable equipment specifically designed for the task and capable of supporting its weight.
Access to the valve is gained by removal of the protection plate which is held in position by six bolts.

FUEL WATER SEPARATOR CLEANING AND REPLACEMENT

The procedure for cleaning or renewing the fuel water separator is as follows;
Park the machine on a firm level site, switch the engine off and open the engine cover.
• Close the fuel supply tap located on the filter housing.
• Place a suitable container under the filter assembly and unscrew the filter bowl securing ring using a filter
key
• Carefully remove filter bowl using the container underneath to catch spilled fuel. Retain sealing ring for
subsequent re-attachment.
TRAXX RF 04/14
© 2014 Alamo Group Inc.
MAINTENANCE
Maintenance Section 5-15