Control Panel - Jenn-Air JDS8850BD Service Manual

Use & Care
O C
VEN

Control Panel

A B
The control panel is designed for ease in programming. The display window shows options for each function and moves from step
to step through the programming process. Control panel features vary by model. Oven display above is programmed for a bake
operation.
A Rapid Preheat
B Convect
C Bake
D Broil
E TIMER 1
F Display
G TIMER 2
H Number Pads
I Favorites
J More Options
K Clean
L Setup
M Vent Fan
N Oven Light
O CANCEL
P Quickset pads
Quickset Pads
Quickset pads are located on each side of the display window
and are used to select the desired function or option in the
display window. To select the option or function, press the
Quickset pad next to the word.
B – 10
OOKING
C D E
I J K L M
Use to decrease preheating time.
Use for convection baking and roasting.
Use for baking and roasting.
Use for broiling and top browning.
Sets timer.
Displays oven functions, options and
window time of day.
Sets timer.
Use to enter time and temperature,
or to enter Favorites names.
Use to access, program or save
baking cycles.
Use to access additional features.
Use to set self-clean cycle.
Use to view or change factory
default settings.
Activates the ventilation fan on
the cooktop.
Use to turn the oven light on or off.
Cancels all operations except Timer,
Clock, Favorites and Setup.
Use to select options in display
window (next to display window
on both sides).
16026929
F G
N O P
If you need to back out of a function or option in the display,
press the Back pad. When your programming is complete,
press the Enter pad or wait four seconds and the function will
start automatically.
Up arrows indicate additional screens with additional options.
Press the Quickset pads next to the arrows to scroll through
the display.
Important: Four seconds after entering the function,
option, number or letter, the function will automatically be
entered. If more than 30 seconds elapse between steps in
programming, the function will be canceled and the
display will return to the previous display.
Clock
Setting the Clock:
1. Press the Setup pad.
2. Select CLOCK using the Quickset pads.
3. Select TIME.
4. Enter the time using the number pads.
5. Press Enter pad.
6. Select AM or PM in 12 hour mode. (For 24 hour clock, see
page 18.)
7. To exit the Setup mode, press Setup pad.
H
© 2006 Maytag Services