DO
Day Override
RT
Regeneration
Time
H
Feed Water
Hardness
RC
Reserve Capacity
CD
Current Day
1.
service, and the time of day is NOT set to 12:01 PM.
2. Use this display to adjust the Day Override. This option
the screen.
3. Press the Extra Cycle button. Use this display to adjust the
in the upper left hand corner of the screen.
4. Press the Extra Cycle button. Use this display to adjust the
"H" in the upper left hand corner of the screen.
Range: 1-199 hardness
5. Press the Extra Cycle button. Use this display to adjust the
"RC" or "SF" in the upper left-hand Corner of the screen.
Description
The timer's day override setting
The time of day that the system
will regenerate (meter delayed,
timeclock, and day-of-week
systems)
The hardness of the inlet water
- used to calculate system
capacity for metered systems
The current day of week
6. Press the Extra Cycle button. Use this display to set the
"CD" in the upper left hand corner of the screen.
7. Press the Extra Cycle button to end User Programming
Mode.