Alarm Reference Tables; Alarm Type Description - Encoder - Extron electronics VN-Matrix User Manual

Alarm Reference Tables

Alarm Type Description — Encoder
Alarm Type
No source
Bad source syncs Source is present, but
No SDI source
lock
Unsupported SDI
mode
Unsupported
mode
Bad source
Analog phasing
error
Hardware
encoding error
Unsupported
audio source
Data rate overload The compressed data rate is too
Network overload
Description
No source present at the input.
unrecognized due to bad sync
measurement.
Source is present, unable to lock.
Applicable to the
VN-Matrix 300 / 325,
ignore for VN-Matrix 200 / 225.
Source is present, mode not
supported.
Applicable to the
VN-Matrix 300 / 325,
ignore for VN-Matrix 200 / 225.
Source is present, mode not
supported.
The hardware is unable to encode
the input signal.
high.
The network is dropping too
many packets.
Action
Check input connections; is
there an output on the loop
through connector?
Increase the compression or
reduce the required bit rate.
VNM Recorder • About Alarms
Default Settings
Critical, reporting
Critical, reporting
Critical, reporting
Critical, reporting
Critical, reporting
Critical, reporting
Warning, reporting
Critical, reporting
Critical, reporting
Critical, reporting
Warning, reporting
60