Table of Contents
Advertisement
Reference Material —
Mounting the IPL T PC1
The IPL T PC1 can be set on a table, mounted on a rack shelf, or mounted under furniture
such as a desk, podium, or tabletop.
Tabletop Use
Rack Mounting
Tabletop Use
Four self-adhesive rubber feet are included with the PC1. For tabletop use, attach one foot
at each corner of the bottom side of the unit, and place the PC1 in the desired location.
Rack Mounting
Rack mount the interface, if desired, using one of the optional 19 inches wide rack shelves
available at www.extron.com.
UL Requirements for Rack Mounting
The following Underwriters Laboratories (UL) requirements pertain to the installation of the
interface into a rack.
•
•
•
•
•
Elevated operating ambient temperature — If the equipment is installed in a closed
or multi-unit rack assembly, the operating ambient temperature of the rack environment
may be greater than room ambient temperature. Therefore, consider installing the
equipment in an environment compatible with the maximum ambient temperature (TMA)
specified by the manufacturer.
Reduced air flow — Install the equipment in the rack so that the amount of air flow
required for safe operation of the equipment is not compromised.
Mechanical loading — Mount the equipment in the rack so that uneven mechanical
loading does not create a hazardous condition.
Circuit overloading — When connecting the equipment to the supply circuit, consider
the effect that circuit overloading might have on overcurrent protection and supply
wiring. Consider equipment nameplate ratings when addressing this concern.
Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted
equipment. Pay particular attention to supply connections other than direct connections
to the branch circuit (such as the use of power strips).
IPL T PC1 • Reference Material — Mounting the IPL T PC1
61
Advertisement
Table of Contents
