Table of Contents
Advertisement
Switching a Codec between Encoder and Decoder
1.
2.
3.
4.
Recording a Stream
When a recording is created, each element that is present within a stream is stored as an
individual file under the same directory. A recording that contains a single element (such
as video) will only require a single file. When a recording contains multiple elements (such
as video, audio, data, and whiteboard), the stream will be saved as multiple files (see
Understanding Saved Recordings With Multiple Elements
Recording Preparation
To prepare a stream for recording, follow the procedure below.
NOTES:
1.
2.
3.
Device List
From the
page (see page 26), click on a VN-Matrix codec device. The
Device page appears.
Click
change device type
NOTE: All connections (streams) must be removed from the codec before it can be
assigned as an encoder or a decoder.
Figure 31.
Change Device
Click
to load the encoder configuration, or
create source
the decoder configuration.
Click the
tab.
Save All
•
Before recording, it is recommended to set the stream storage location (see
Update Path
on page 33).
•
It is recommended that a new directory is created for each recording so that
associated files are easier to locate (see
Ensure that the VN-Matrix codec is configured as an encoder (see
VN‑Matrix Codec as an Encoder
From the
Device List
page (see page 26), click on the VNM Recorder device.
The
Recorder Device
page (see page 28) appears.
From the
Recorder Device
Recorder
The
page (see page 30) appears.
(see figure 31,
).
1
1
1
Make Directory
on page 49).
page (see page 28), click the
VNM Recorder • Recording and Playing Streams
to load
create display
on page 46).
on page 34).
Setting up a
icon.
Recorder
50
Advertisement
Table of Contents
