Alarms Page; Filter Settings - Extron electronics VN-Matrix User Manual

Alarms Page

This page is accessed by selecting the
Figure 34.
The Alarms page enables a user to define and monitor system alarms.

Filter Settings

Figure 35.
The Filter Settings panel allows the default settings for each alarm type to be modified.
•
•
•
•
Alarms Page
Filter Settings Panel
Alarm Type — Select the particular alarm that is to have its default setting changed
(see Alarm Type on page 57).
Alarm Source — Select the device where the alarm is to change. Alarm filters may be
set for either a single, specific unit or for all VN-Matrix 200, 225, 300, or 325 devices in
the system.
Alarm Severity — Set the alarm severity. Each alarm condition has a default severity
which may be overwritten using the filter controls. The default setting is shown in this
drop-down menu (see Alarm Severity
Alarm Reporting — Set the alarm to be either "reporting" or "not reporting". Each
alarm condition has a default reporting setting. The default setting is shown in this
drop-down menu.
tab on the Device List
Alarms
on page 57).
VNM Recorder • About Alarms
page (see page 26).
56