Detailed Settings Function - Panasonic S-200PE1E8 Technical Data & Service Manual

7-3. Detailed Settings Function

• This allows the system address, indoor unit
address, and other settings to be made for the
individual or group-control indoor unit to which
the remote controller used for detailed settings is
connected.
When detailed settings mode is engaged,
operation stops at the individual or group-control
indoor unit where the remote controller used for
detailed settings is connected. Simple settings
items can also be set at this time.
<Procedure>
Press and hold the
1
simultaneously for 4 seconds or longer.
" ," unit No. "
2
group control), item code "
" " are displayed blinking on the remote
controller LCD display (Fig. 7-2).
At this time, the indoor unit fan (or all indoor unit
fans in the case of group control) begins operating.
If group control is in effect, press the
3
button and select the address (unit No.) of the
indoor unit to set. At this time, the fan at the indoor
unit begins operating.
Press the temperature setting
4
buttons to select the item code to change.
Press the timer time
5
desired setting data.
* For item codes and setting data, refer to the
following page.
Press the
6
and remains lit, and setting is completed.)
Press the
7
controller display.
7
, and buttons
" (or " " in the case of
," and settings data
/
/ buttons to select the
button. (The display stops blinking
button to return to normal remote
7
1 6
7-4
2
CZ-RTC2
1 5
Fig. 7-2
3
4