Simple Settings Function - Panasonic S-200PE1E8 Technical Data & Service Manual

7-1. Simple Settings Function

• This allows the filter lifetime, operating mode
priority change, central control address, and other
settings to be made for an individual or group-
control indoor unit to which the remote controller
used for simple settings is connected.
When simple settings mode is engaged, operation
stops at the individual or group-control indoor unit
to which the remote controller for simple settings is
connected.
<Procedure>
1 Press and hold the
simultaneously for 4 seconds or longer.
" ," unit No. "
2
group control), item code "
" " are displayed blinking on the remote
controller LCD display (Fig. 7-1). At this time, the
indoor unit fan (or all indoor unit fans in the case of
group control) begins operating.
If group control is in effect, press the
3
button and select the address (unit No.) of the
indoor unit to set. At this time, the fan at the indoor
unit begins operating.
* If unit No. "
will be made for all indoor units.
4 Press the temperature setting
buttons to select the item code to change.
Press the timer time
5
desired setting data.
* For item codes and setting data, refer to the
following page.
Press the
6
and remains lit, and setting is completed.)
7
Press the
controller display.
7
and buttons
" (or " " in the case of
," and settings data
" is displayed, the same setting
/
/ buttons to select the
button. (The display stops blinking
button to return to normal remote
7
1 6
7-2
2
Fig. 7-1
Fig. 7-1
CZ-RTC2
5
Fig. 7-1
3
4