List Of Simple Setting Items - Panasonic S-200PE1E8 Technical Data & Service Manual

7-2. List of Simple Setting Items

Item code
Filter sign ON time
(filter life time)
Degree of filter fouling
Central control
Operating mode
priority change
Fan speed when
heating thermostat is
Heating intake
temperature shift
Electric heater
installation
Humidifying when
heater thermostat is
Permit/prohibit
heating/cooling
NOTE
• In order to avoid water leakage and damage to the fan, do not set for humidifying when the thermostat is OFF
unless a vaporizing humidifier is used.
• Consider the device purpose and type when changing the settings. Incorrect settings may result in malfunction.
• Do not change any setting data that does not appear in this list.
Item
No.
0000 Not displayed
0001 150 hours
0002 2,500 hours
0003 5,000 hours
0004 10,000 hours
0005 Use the filter clogging sensor.
0000 Standard (setting at time of shipping)
0001
0001 Central control address 1
0002 Central control address 2
0003 Central control address 3
address
0064 Central control address 64
0099 No central control address set (setting at time of shipping)
0000 Normal ( setting at time of shipping)
0001 Priority
0000
0001
0002
OFF 0004
0005
0006
0000 No shift
0001 Shifts intake temperature 1 °C down.
0002 Shifts intake temperature 2 °C down.
0003 Shifts intake temperature 3 °C down.
0004 Shifts intake temperature 4 °C down.
0005 Shifts intake temperature 5 °C down.
0006 Shifts intake temperature 6 °C down.
0000 No heater
0001 Heater installed
0000 No (setting at time of shipping)
0001 Yes
OFF
0000 Permit
automatic
0001 Prohibit
0000 Normal
Cool-only
0001 Cool only (Set "1" for item code OD.)
Setting data
Description
Highly fouled
(Filter sign ON time is reduced to one-half the set time.)
Compressor ON
MED 1 min., LO 3 min.
MED
LO
MED 1 min., LO 3 min.
MED
LO
7-3
Compressor OFF
LO
LO
LO
MED
MED
MED
7