CHECKING THE CABLE LAYOUT
After replacing the operating module and during
maintenance the correct layout of the cables of the
supply lines to the operating module is to be checked:
– Anatomically shaped seat unit: Layout of the cables
and attachment to the armrest receptacles with
glued brackets as in fig. 6–23 to 6–24.
– Anatomically shaped seat unit (Recaro): Layout of
the cables and attachment to the armrest recepta-
cles with glued brackets as in fig. 6–25.
Attention:
!
a) The operating module must be completely
swerved to the front (view fig. 6–23) and back (view
fig. 6–24) and the adjustment tube maximally ex-
tractable without any tension on the cable.
b) The cable may not exceed the contour of the ve-
hicle.
6–23
6–24
6–25
45