Can-Bus Hardware; Operating Module - Meyra Optimus Service Manual

CAN-BUS HARDWARE

The hardware of the CAN-Bus control consists of

– Operating module

– Power module
– Adjustment module (option)
The modules used for the CAN-bus control have
– cables that are pluggable and secured against unin-
tentional deletion (fig. 6–1),
– are code secured against swapping
– and are protected against spray water (IP 54).
OPERATING MODULE
The operating module (BM; fig. 6–2) serves as the dri-
ving switchbox and has the following features:
– same operating module for all vehicles with CAN-
bus control
– enforced joystick with "dead-man-function"
– LED report for lighting
– three-digit switchable speedometer display: option-
ally speed in km/h, daily km (manual reset) or total
km:
– protection against unauthorised used through mag-
netic key
– integrated charging socket and signal unit
– plug connector for special operations: ON/OFF, ex-
ternal keys, external joystick (& service)
26
6–1
6–2