Front Wheels - Meyra Optimus Service Manual

Attention:
!
During assembly the rim or the mounting lever may
not damage the tube or let it be jammed.
– Pump the wheel up to a pressure of 2.5 bar.
– Fit the wheel onto the hub and screw in the wheel
screws.
– Tighten the wheel screws to the predetermined
torque. View chapter < Maintenance/DIN norms and
guidelines >.
– Jack down the vehicle.

FRONT WHEELS

Attention:
!
Mount the rim with the magnets for the speed gauge
(fig. 5–3/ E) to the right side.
24
E
5–3