Meyra Optimus Service Manual page 42

CAN-BUS ERROR LIST PAGE 5
Error- Type of Error
Number
E41 ERR_INIT_ERR_BM1
E42 ERR_INIT_ERR_BM2
E43 ERR_INIT_ERR_VM
E44 ERR_BRAKE
E45 ERR_BRAKE_FAIL
E46 ERR_MOT
E47 ERR_SERVO_POTI
E48 ERR_BM_JOY_ERR
E49 ERR_BM_DMS_ERR
42
Short-info to the cause
An error occurred in the initiali-
sation of the first operating mo-
dule, therefore the driving mode
is disrupted
An error occurred in the initiali-
sation of the second operating
module, therefore the driving
mode is disrupted
An error occurred in the initiali-
sation of the adjustment motor
module, therefore the driving
mode is disrupted
An error of the brakes was notices
An error in the addressing of the
brakes was noticed
An error was noticed during the
initialisation of the motor-addres-
sing (power current at 0% PWM)
An error was noticed during the
supervision of the steering servo-
potentiometer
An error was noticed during the
supervision of the joystick (BM!)
An error was noticed on an ope-
rating module in the DMS-signal-
generation
Suggestion for
trouble shooting
Software-error BM1
Software-error BM2
Software-error VM
Brake-error, brake-
drive-error
Brake-error, brake-
drive-error
Error in the power sta-
ge of the drive PM1/
PM2
Error in the cable to
the steering servo or
at the encoder of the
steering poti
Joystick-error BM:
Joystick, plug connec-
tion, cable
Joystick-error BM:
Joystick, plug connec-
tion, cable, conductor
board