Adjusting The Detection Point Of The Touch Screen (Calibration Function) - Yamaha M7CL Owner's Manual

Adjusting the detection point of the touch screen (Calibration function)

Here's how to correctly align the positions of the LCD display and the touch screen.
1
While holding down the SCENE MEMORY
[STORE] key of the panel, turn on the
power.
After the opening screen, the following startup menu
screen will appear.
2
Press the TOUCH SCREEN CALIBRATION
button.
The TOUCH SCREEN CALIBRATION MODE
screen will appear, allowing you to adjust the touch
screen.
HINT
• When you cannot start calibration by touching, press the
SCENE MEMORY[ ▲ ][ ▼ ] key to select TOUCH SCREEN
CALIBRATION button and then press the [STORE] key to
start.
Adjusting the detection point of the touch screen (Calibration function)
3
Press the START button.
A confirmation dialog box will appear.
4
Press the OK button in the dialog box.
A cross-shaped cursor will appear in the screen.
5
This cursor will appear a total of three
times. Press each location at which it
appears.
NOTE
• In order to set the detection points accurately, press the
cross-shaped cursor from the position and posture in which
you normally operate the unit.
6
Press the EXIT button.
The M7CL will start up in normal operating mode.
HINT
• Alternatively, you can continue by selecting a different menu
instead of pressing the EXIT button.
217
M7CL Owner's Manual
19