Controlling Mute Groups - Yamaha M7CL Owner's Manual

DCA/MUTE
GROUP field
● Selecting the mute groups to which a
specific channel will belong
1
Press the [SEL] key of the input channel /
output channel that you want to assign.
2
Press any one of the encoders of the
SELECTED CHANNEL section to access
the SELECTED CHANNEL VIEW screen.
In this screen you can view the mix parameters for the
currently selected channel.
1
3
1 MUTE field
Here you can make mute group settings for the cur-
rently selected channel.
B
Popup button
Press this button to open the DCA/MUTE GROUP
ASSIGN MODE popup window. For details, refer to
"Selecting the channels assigned to a specific mute
group."
C
MUTE SAFE indicator
This will light if the currently selected channel is set to
Mute Safe. For more about mute safe, refer to "Using
the Mute Safe function" (→ p. 119).
D
Mute group select buttons 1–8
These select the mute group(s) to which the currently
selected channel will be assigned.
3
Use the mute group select buttons to select
the mute group(s) to which the currently
selected channel will be assigned (multiple
selections are allowed).
4
Select the mute group(s) for other channels
in the same way.
2
4

Controlling mute groups

To use mute groups, you must first assign the Mute On/Off
function for a mute group 1–8 to a user-defined key, and
then operate that user-defined key.
1
In the function access area, press the
SETUP button to access the SETUP screen.
2
In the upper left of the screen, press the
USER SETUP button to access the USER
SETUP popup window.
This popup window lets you limit the functionality
that can be used by the user, and also lets you make
system-wide settings. This window includes several
pages, which you can switch between using the tabs
located at the bottom of the window.
3
Press the USER DEFINED KEYS tab to
select the USER DEFINED KEYS page.
The USER DEFINED KEYS page lets you assign
functions to user defined keys [1]–[12].
1
1 User defined keys popup buttons
4
Press the popup button for the user-defined
key to which you want to assign the mute
on/off function.
The USER DEFINED KEY SETUP popup window
will appear.
Using mute groups
117
M7CL Owner's Manual
11