Touch Screen Calibration - Yamaha QL5 Service Manual

TOUCH SCREEN CALIBRATION

1) While holding down the B [SEL] key, turn on the power switch, and the Special Mode Screen will appear, where INITIALIZE,
TRIM, CALIBRATION, etc. are executed.
2) Among MODE SELECT buttons, touch [TOUCH SCREEN CALIBRATION], and the touch screen window will appear. Then
touch the [START] button.
* If the above window does not appear, press the FADER BANK [B1]/[B2] key to select [TOUCH SCREEN CALIBRATION]
and press the [B4] key to start.
3) As a confi rmation message will appear, touch the [OK] button.
4) As a cross cursor appears in the screen 3 times in total, touch to match their positions.
* For accurate adjustment, touch the cross cursor at such position and in such posture used usually for operation.
QL5/QL1
157