Display Section - Yamaha M7CL Owner's Manual

Top panel

■ Display section

This is a touch screen that you can operate by touching the
surface of the screen. A USB connector is provided on the
right side of the display.
1 Display (touch screen)
This display shows the information you need to operate
the M7CL, and lets you make system-wide settings and
control mix parameters for input and output channels.
Since this is a touch screen, you can use your finger on the
screen to select menus or set parameters. However, you
cannot press two or more locations to operate them simul-
taneously.
NOTE
• If the touch screen becomes dirty, wipe it with a soft dry cloth.
CAUTION
• Never use a sharp or pointed object such as your fingernail to
operate the touch screen. Doing so may scratch the screen
and render the touch screen inoperable.
18
M7CL Owner's Manual
1
B
USB connector
You can connect a USB storage device here to save/load
internal data. USER KEY data that determines the user
level can be saved on a USB storage device to limit the
functionality that can be operated by each user.
NOTE
• You can connect a USB storage device to the USB connector.
However, operation is guaranteed only with USB flash memory.
■ USB storage device formats
Storage media with capacities 2GB or less format-
ted in FAT12, FAT16, or FAT32 are supported. If
your storage device is formatted otherwise, please
re-format it in the SAVE/LOAD screen.
■ Prevention of accidental erasure
Some USB storage devices have a write protect
setting that lets you prevent data from being erased
accidentally. If your storage device contains impor-
tant data, it's a good idea to use the write protect
setting to prevent accidental erasure.
On the other hand, you'll need to make sure that
your USB storage device's write protect setting is
turned off before you save data.
CAUTION
• An ACCESS indicator is shown in the function access area
while data is being accessed (saved, loaded, or deleted). Do
not disconnect the USB connector or power-off the M7CL
while this indicator is shown. Doing so may damage your stor-
age media, or may damage the data in the M7CL or on your
media.
2