Centralogic Section - Yamaha M7CL Owner's Manual

■ Centralogic section

In this section you can control a group of (up to) eight
channels or DCA groups selected in the NAVIGATION
KEYS section.
■ SCENE MEMORY/MONITOR section
In this section you can perform operations for scene mem-
ory and monitoring.
1
3
1
2
3
4
5
6
2 4
1 Multi-function encoders
According to the type of screen that is currently selected,
these encoders control the knobs selected in the touch
screen.
B
[SEL] key
These keys select the channel to be controlled. When you
press this key to make the LED light, that channel will be
selected for control in the SELECTED CHANNEL sec-
tion and in the touch screen.
C
[CUE] key
These keys select the channel to be cue-monitored. If cue
is on, the LED will light.
D
Meter LEDs
These LEDs indicate the input/output level of the channel.
E
[ON] key
This switches the channel on/off. If a channel is on, the
key LED will light.
F
Fader
This adjusts the input/output level of the channel. You can
also make internal settings (→ p. 163) so that these faders
are used as controllers to adjust the gain of each GEQ
band.
1 SCENE MEMORY [STORE] key
This key stores the current mix parameter settings into a
dedicated scene memory.
B
SCENE MEMORY [RECALL] key
This key recalls previously-saved settings from a scene
memory.
C
SCENE MEMORY [▲]/[▼] keys
Use these keys to select the scene number that you want to
store or recall. The number of the currently selected scene
is shown in the function access area in the right of the
touch screen. You can press the [▲]/[▼] keys simulta-
neously to return to the current scene number.
D
[MONITOR LEVEL] knob
Adjusts the signal level of the monitor output. If the
PHONES LEVEL LINK function is turned on in the
MONITOR screen, this will also adjust the level of the
front panel [PHONES] jack.
Top panel
19
M7CL Owner's Manual
2