Canon Image runner 5075 Easy Operation Manual page 31

Additional Functions
3 Adjustment/Cleaning
Enables you to make fine adjustments to the zoom, adjust the contrast, or perform cleaning for the machine.
Zoom Fine Adjustment
Enables you to perform a fi ne adjustment to compensate for the slight difference in size that
may occur between the size of the original image, and the size of the copied/printed image
when you print a copy or a document from an inbox.
Saddle Stitcher Staple Repositioning
Enables you to reposition the stapler of the saddle stitcher unit after clearing a staple jam, or
after replacing the staple cartridge.
Saddle Stitch Position Adjustment
Enables you to make adjustments to the saddle stitch position if you notice that the folds of
the paper are not exactly in the middle of the booklet.
Creep (Displacement) Correction Adjustment
(1/3) Enables you to adjust the displacement of pages that occurs between the outermost and
center page when the Booklet mode is set.
Fold Placement Adjustment
Enables you to adjust the folding positions of the paper when the C-Fold or Z-Fold mode is
set.
*3 Can be set only if the optional Saddle Finisher-AD2 is attached.
*4 Can be set if the optional Document Insertion/Folding Unit-F1 is attached.
Exposure Recalibration
Enables you to recalibrate the exposure adjustment scale if differences between the image
in the original and the print occur.
Character/Background Contrast Adjustment
Enables you to adjust the relative contrast (brightness) of the hidden text in the background
when using the Secure Watermark mode.
Feeder Cleaning
(2/3)
Enables you to clean the rollers of the feeder by repeatedly feeding blank sheets of paper
through it.
Wire Cleaning
Enables you to clean the corona assembly wires inside the main unit.
Drum Cleaning
Enables you to clean the drum if the images printed are light or distorted.
*5 Displayed only if the optional Secure Watermark is activated.
59
Reference Guide Chapter 4
Display Original Scanning Area Cleaning Method
Enables you to confi rm the procedure for cleaning the original scanning area.
(3/3)
4
Report Settings
Press to set the print conditions for printing a Send TX Report and Activity Report, or to print the Address Book List
or User's Data List (settings that have been specified from the Additional Functions screen).
Settings: Send
Enables you to set the print conditions for printing a Send TX Report and Activity
Report.
TX Report
Enables you to check whether documents were sent correctly to the destination. A Send
TX Report can automatically be printed after the documents are sent. You can also set the
machine to print a Send TX Report only when a transmission error occurs.
Activity Report
Enables you to show the results of send and receive jobs. You can set for the Activity Report
to be printed at a specifi ed time or be automatically printed when the number of send and
(1/1)
receive transmissions reaches 100. You can also set that the send and receive logs are
printed separately.
*6 Displayed only if the optional Universal Send Kit is activated, or the optional Super G3 FAX
Board is installed.
Additional Functions
Sending and Facsimile Guide
Chapter 12
60