Timer Settings - Canon Image runner 5075 Easy Operation Manual

Additional Functions
Job Separator between Jobs
Enables you to insert blank pages before the fi rst page of each print job, from a selected
paper drawer. This is useful when you want to separate one print job form another when
printing multiple jobs.
Job Separator between Copies
Enables you to insert blank pages from a selected paper drawer, after a specifi ed number of
copy sets are printed, when you are using the Collate, Offset Collate, or Staple Collate mode.
This is useful when you want to separate every certain number of print jobs when printing
multiple jobs.
(5/7)
Job Duration Display
Enables you to display the remaining time that it takes to complete an operation in units of
one minute on the touch panel display.
Register Sizes for Side Paper Deck
Enables you to store the paper sizes that you most frequently load into the optional Paper
Deck-AE1.
Different Paper Sizes for the Output Tray
Enables you to set whether to output different sized paper to an output tray.
*1 Displayed only if an optional fi nisher is attached.
*2 Displayed only if the optional Paper Deck-AE1 is attached.
Cleaning Display for the Original Scanning Area
Enables you to set the machine to display a message prompting you to clean the original
scanning area for the feeder, when dirt has been detected.
Limited Functions Mode
Enables you to temporally limit the use of the fi nishing mode, if a problem frequently occurs
when using the fi nisher mode.
(6/7)
Shutdown Mode
Enables you to set the machine to cancel jobs in progress and restrict further access to the
hard disk when you turn the machine OFF with the main power switch.
Unfinished Tab Paper Forced Output
Enables you to set whether to output unfi nished tab papers.
*1 Displayed only if an optional fi nisher is attached.
57
Initialize Common Settings
Enables you to restore all of the Common Settings to their defaults (initial settings).
(7/7)
2

Timer Settings

Enables you to make various timer related settings for the machine, such as the time it takes for the machine to
enter into the Sleep mode.
Time Fine Adjustment
Enables you to make adjustments to the current time.
Auto Sleep Time
Enables you to set the machine to automatically switch the control panel power switch OFF
when it has been idle for a certain period of time after the last print job or a key operation is
performed.
Auto Clear Time
Enables you to set the machine to automatically return to the Basic Features screen of the
selected function when it has been idle for a certain period of time after the last print job or a
(1/1)
key operation is performed.
Time Until Unit Quiets Down
Enables you to set the machine to enter the Quiet mode after a specifi ed amount of time has
elapsed following a print job, or a key operation is performed.
Daily Timer Settings
Enables you to set the time that the machine automatically enters the Sleep mode each day
of the week.
Additional Functions
Reference Guide Chapter 4
58