Table of Contents
Advertisement
Using the telephone
Using the Amplification Function
You can increase the volume according to your own hearing
requirements.The button
function to be activated or not during the conversation.
When the function is activated, the red light located on the button
is lit. The Boost icon
CAUTION: This telephone can produce very high (loud) sound
levels. Repeated incremental exposure to amplification levels
greater than 18 dB may be harmful to people without hearing
loss. Always adjust the volume control to the minimum setting
after using the phone.
Using your Phone with hearing aids
Your phone can be used with hearing aids equipped with a telecoil
(T-coil). Adjust your hearing aid "T-switch" position. Make sure to
hold the handset close to your hearing aid to have a good receiving
volume.
Hands-free
During a call, you may turns on the speakerphone that is built into
the phone. In this mode you can enjoy the comfort of a hands-free
conversation.
To turns on the speaker, press the
replace the handset on the base. The Red LED
To turns off the speaker, simply pick up the handset and you
can keep on talking via the handset. The LED
Adjusting Speaker Volume
In speaker mode you can adjust the speaker volume by pressing
or
key.
Tone Response
When the boost is activated during the call, you can use Left (
/Right (
) keys to change the tone response.
(Boost) allows extrareceiving
showed on the screen.
key during a call, then
25
icon is activated.
icon will turns off.
)
Advertisement
Table of Contents
