Although Tray A Is Designated As Delivery Outlet, Paper Is Delivered To Tray; The Red Warning Light Blinks And Print Operation Is Not Accepted -> New Item58 - Canon imagePRESS C7000VP Series Trouble Shooting Information

[Step3]
Remove the part shown above with the spring, and
then replace the gears.
2.10 Although Tray A is designated as delivery outlet, paper is delivered
to Tray B.
 Description
If enabling 'High Volume Stack Mode' at Additional Functions (Additional Functions> Common
settings> High Volume Stack Mode), Tray B will be fixed as the delivery outlet. For this reason,
paper will be forcibly delivered to Tray B even though Tray A is designated as the delivery outlet
on the control panel.
 Field Remedy
Disable 'High Volume Stack Mode' at Additional Functions. This allows free setting on the
control panel for the delivery outlet.
2.11 The red warning light blinks and print operation is not accepted
-> New item
The red warning light may blink and print operation not be accepted even when the UI does not
show the state of door open.
This state is generated when the front cover is closed with incorrect connection of the drawer
connector in the machine.
Check continuity of the drawer connector (e.g. whether there is piece of paper caught).
Trouble Shooting Information for C7000VP series
Page 58
Rev. 2.0
2010/09/17