Canon imagePRESS C7000VP Series Trouble Shooting Information page 30

*3 Abnormal toner supply
・Any occurrence of developer
・Any occurrence of Tiger stripe?
・Feed 100 sheets of A3/LDR size or larger
for PG10
（200 sheets for A4/LTR）
Service mode
COPIER > Display > DENS > DENS-YMCK
- Service mode
COPIER > Adjust > DENS > HLMT-TY/M/C/K
Settings: If it is 4 at this point, change it to 9.
If it is 9 at this point, change it to 10.
Note: Density might decrease as a negative effect.
Check
overflow?
No
Y +1or more
M/C/K +2 or more
No
Finish
Yes
No improvement even after
repeating the left loop 3 times
Yes
Trouble Shooting Information for C7000VP series
Page 30
・Replace developer
・Clean in the machine
Execute the above.
Replace
developing
assembly
Rev. 2.0
2010/09/17