Canon imagePRESS C7000VP Series Trouble Shooting Information page 135

Appendix 3 Points to Note When Replacing Primary/Secondary Fixing
Intermediate Unit
Fixing intermediate unit (Service Part) mainly consists of the following parts:
- Fixing assembly frame
- Fixing internal driver PCB
- Fixing drive assembly
- Fixing roller
- Fixing heater
- Refresh roller
- Fixing belt separation roller fixing spring
MEMO:
The refresh roller and the fixing belt separation roller fixing spring are included in the package
of the fixing intermediate unit. They are not attached to the fixing intermediate unit. Note that
the fixing belt separation roller fixing spring is included only in a package of the primary fixing
intermediate unit.
Be sure to attach the following parts, which are included in the package of a new fixing
intermediate unit, to the new fixing intermediate unit.
Refresh roller

Fixing belt separation roller fixing spring (for the primary fixing assembly only)

Be sure to remove the following parts from the old fixing assembly and reattach them to the new
fixing intermediate unit.
-Fixing upper cover
-Fixing web unit
-External heat roller unit
-Fixing belt unit (primary fixing assembly), or Pressure roller unit (secondary fixing assembly)
-Internal delivery unit
-Short connectors (for detecting location)
Attach the 2 short connectors [1] (for detecting location) to the drawer unit in the new fixing
intermediate unit. The short connectors (for detecting location) need to be removed/reattached
in case of replacing a drawer unit.
Trouble Shooting Information for C7000VP series
Page 135
Rev. 2.0
2010/09/17