Cadillac 2015 Escalade Owner's Manual page 65

3-8 Seats and Restraints
equipped) to the desired
positions for getting out of the
vehicle.
2. Press and release SET. A beep
will sound.
3. Immediately press and hold
until two beeps sound.
Manually Recalling Memory
Positions
If the vehicle is off or not in
P (Park), press and hold "1," "2," or
(Exit) to manually recall the
previously stored memory positions
and massage settings (if equipped).
Releasing "1," "2," or
stored positions are reached stops
the recall.
If the vehicle is on and in P (Park),
press and release "1," "2," or
manually recall the previously
stored memory positions. Turning
the ignition off before the stored
positions are reached stops the
recall.
If the massage feature is off when
the memory recall is performed, the
previously stored type and intensity
will be recalled, but it will remain off
until activated with the On/Off
control.
Automatically Recalling Memory
Positions (Auto Memory Recall)
The Auto (Automatic) Memory
Recall feature automatically recalls
the current driver's previously stored
"1" or "2" position and massage
settings (if equipped) when entering
the vehicle.
If the Auto Memory Recall feature is
before the
enabled in the vehicle
personalisation menu, then do one
of the following to recall the "1" or
"2" position:
to Press
and open the driver door.
Press
when the driver door is
already open.
on the RKE transmitter
on the RKE transmitter
Press the lock/unlock button on
the outside driver door handle
and open the driver door. The
RKE transmitter must be present
for the recall to activate.
RKE transmitters are not labelled
with a number. If your memory seat
position is stored to "1" or "2" but
this position is not automatically
recalling, then change the stored
position or switch RKE transmitters
with the other driver.
See Vehicle Personalisation on
page 5-45.
To stop recall movement, press one
of the memory, power mirror,
or power seat controls; press the
power tilt and telescoping steering
column control; or press the
adjustable pedal control.
RKE transmitters are not labelled
with a number. If your memory seat
position is stored to "1" or "2" but
this position is not automatically
recalling, then change the stored
position or switch RKE transmitters
with the other driver.