Cadillac 2015 Escalade Owner's Manual page 287

9-76 Driving and Operating
6. Install tow ball (5) into the hitch.
7. Remove clip (4) and spacer (3)
from pin (2).
8. Install pin (2) through the hole in
the hitch and tow ball (5).
9. Install spacer (3) and clip (4)
onto pin (2).
Removing and Storing the
Tow ball
Warning
An unsecured tow ball could be
thrown about the vehicle during a
crash or sudden manoeuvre.
Someone could be injured.
Always properly secure the
tow ball in its storage bag in the
rear driver side jack storage
compartment when not in use.
1. Remove clip (4) and spacer (3)
from pin (2).
2. Remove pin (2) from the hitch
and tow ball (5).
3. Remove tow ball (5) from the
hitch.
4. Install tow ball (5) into storage
bag (1) as shown.
5. Install spacer (3) and clip (4)
onto pin (2).
6. Place assembled pin onto
bag (1) and tie.