Cadillac 2015 Escalade Owner's Manual page 137

5-4 Instruments and Controls
Turn the band up for more
sensitivity to moisture.
Turn the band down to lower INT
setting for less sensitivity to
moisture.
Move the band out of the
position to deactivate Rainsense.
z
AUTO (Rainsense On/Off):
Press to turn Rainsense on or off.
z
When turned on and
in one of the Rainsense wipe
sensitivity positions the wipers can
be adjusted for more or less
sensitivity to moisture. When turned
off, the wipers operate as timed
intermittent wipers and can be
adjusted for more or less frequent
wipes.
z
If AUTO is on when the ignition
is turned on, or if the ignition is in
ON/RUN and the
is in one of the sensitivity settings
z
when
INT
a message may display indicating if
Rainsense was turned on or off.
If the ignition is in ON/RUN and
z
FRONT is not in one of the
sensitivity settings when
is turned on, a message may
display indicating that the wiper
band must be in one of the
sensitivity settings for Rainsense to
operate.
Wiper Arm Assembly Protection
FRONT is
When using an automatic car wash,
move the windscreen wiper lever to
OFF. This disables the automatic
Rainsense windscreen wipers.
z
FRONT band
AUTO is turned on or off,
z
AUTO
Windscreen Washer
{
Warning
In freezing weather, do not use
the washer until the windscreen is
warmed. Otherwise the washer
fluid can form ice on the
windscreen, blocking your vision.
L m
(Washer Fluid): Push the
paddle marked with the windscreen
washer symbol at the top of the
indicator lever to spray washer fluid
and activate the wipers. The wipers
will continue until the paddle is
released or the maximum wash time
is reached. When the paddle is
released, additional wipes may
occur depending on how long the
windscreen washer had been
activated. See Washer Fluid on
page 10-18 for information on filling
the windscreen washer fluid
reservoir.