Cadillac 2015 Escalade Owner's Manual page 126

3. Push the latch plate into the
buckle until it clicks.
If the latch plate will not go fully
into the buckle, check to see if
the correct buckle is being used.
Position the release button on
the buckle so that the safety belt
could be quickly unbuckled if
necessary.
4. To tighten the belt, push down
on the child restraint, pull the
shoulder portion of the belt to
tighten the lap portion of the belt
and feed the shoulder belt back
into the retractor. When installing
a forward-facing child restraint, it
may be helpful to use your knee
to push down on the child
restraint as you tighten the belt.
Seats and Restraints
5. If the child restraint has a top
tether, follow the child restraint
manufacturer's instructions
regarding the use of the top
tether. Refer to the instructions
that came with the child restraint
and see ISOFIX Child Restraint
Systems on page 3-64.
6. Before placing a child in the
child restraint, make sure it is
securely held in place. Push and
pull the child restraint in different
directions to be sure it is secure.
To remove the child restraint,
unfasten the vehicle safety belt and
let it return to the stowed position.
If the top tether is attached to a top
tether anchor, disconnect it.
3-69