Cadillac 2015 Escalade Owner's Manual page 357

10-64 Vehicle Care
3. Assemble the two jack handle
extensions (4) and wheel
wrench (5), as shown.
4. Insert the open end of the
extension (7) through the hole in
the rear bumper (8) (hoist shaft
access hole).
5. Raise the tyre part way upward.
Make sure the retainer is seated
in the wheel opening.
6. Raise the tyre fully against the
underside of the vehicle by
turning the wheel wrench
clockwise until you hear two
clicks or feel it skip twice. The
cable cannot be overtightened.
7. Make sure the tyre is stored
securely. Push, pull, and then try
to turn the tyre. If the tyre
moves, use the wheel wrench to
tighten the cable.
8. Reinstall the spare tyre lock.
9. Reinstall the hoist shaft access
cover.
If equipped, reinstall the hitch
cover and turn the retainers
clockwise.