Replacement Bulbs; Electrical System; Overload - Cadillac 2015 Escalade Owner's Manual

10-28 Vehicle Care
1. Bulb Socket
2. Bulb
3. Lamp Assembly
To replace one of these bulbs:
1. Push the lamp assembly (3)
toward the centre of the vehicle.
2. Pull the lamp assembly down to
remove.
3. Turn the bulb socket (1)
anticlockwise to remove it from
the lamp assembly (3).
4. Pull the bulb (2) straight out of
the bulb socket (1).
5. Push the replacement bulb
straight into the bulb socket and
turn the bulb socket clockwise to
install it into the lamp assembly.
6. Push the lamp assembly back
into position until the release tab
locks into place.

Replacement Bulbs

Exterior Lamp
Front Turn Signal WY21W
Light
Number Plate Lamp
For replacement bulbs not listed
here, contact your dealer.

Electrical System

Electrical System

Overload

The vehicle has fuses to protect
against an electrical system
overload. Fuses also protect power
devices in the vehicle.
Replace a bad fuse with a new one
of the identical size and rating.
If there is a problem on the road and
Bulb
a fuse needs to be replaced, there
Number
are some spare fuses and a fuse
puller in the Instrument Panel Fuse
Block. The same amperage fuse
can also be borrowed. Choose
W5W LL
some feature of the vehicle that is
not needed to use and replace it as
soon as possible.